Skip to content

Green routing and carbon minimisation

Shorter routes aren’t always greener routes. Green routing optimises for emissions directly.

  • Free 30-minute call
  • No commitment
  • You own the code
Typical industries
Logistics and transport, Trucking and fleet
Problem type
Routing
You receive
A documented model, run on your data

In short: A green route optimisation plans delivery routes so that your vehicles use as little fuel and emit as little carbon as possible. The shortest distance alone doesn’t achieve that. It accounts for vehicle type, load and speed and, for electric fleets, battery range and charging stops.

The problem

The sustainability report is due, and finance wants the transport emissions figure. Your routing tool minimises kilometres, so you assume the plan is also the cleanest one. Often it isn’t. Meanwhile your new electric vans come back to the depot before their route is done. The battery is low, because the plan never said when to charge them.

Why the shortest route can be the dirtiest

A routing model that minimises kilometres assumes that fewer kilometres mean less CO₂. That’s often wrong. Picture a fully loaded diesel van in stop-and-go traffic in the city centre. On that short stretch, it can emit more than on a longer detour where traffic flows. Fuel burned depends on the vehicle type and its load. It also depends on speed, hills, traffic and idling. A model that only knows distance sees none of it.

Why a distance-based tool can’t plan green routes

Cost in francs and emissions in tonnes of CO₂ are separate goals. Mix them into one number, and you can’t show finance what the greener plan costs. Finance then often turns that plan down. A tool that only minimises distance decides for you how much CO₂ counts, and it never tells you. It also doesn’t know how far an electric van can still drive at three in the afternoon.

What changes

Today, you run the shortest routes and work out the emissions afterwards for the report. Our model plans for emissions directly, weighing vehicle type, load and speed as well as distance. It also plans each electric van’s charging stop into its round. You see the cost and the emissions of each plan side by side, and choose.

What you get

We build on vehicle routing optimisation, with emissions as a goal in their own right. The model knows your vehicles, their loads and the speeds they drive in practice. It plans the range and the charging stops of electric vans together with the route and its time windows. You judge the result on total emissions in CO₂e. CO₂e stands for CO₂ equivalent: every greenhouse gas is converted into the amount of CO₂ that warms the climate just as much. Emissions per drop, total distance and cost per drop count too. We test it on your own fleet and orders before anything goes live.

  • A model written around your own green routing and carbon minimisation rules.
  • Results measured in the numbers you already track.
  • It slots into how you already work, and you can check every answer it gives.

How it works

We write your depots, your customers, your fleet and your rules into one model. You get the routes that cost the least and keep every rule. You still have the last word: you check the result and send it out.

Why green route optimisation starts with the objective

Every optimisation model has an objective function: the one number it tries to make as small as possible. Most routing models pick distance, because it’s easy to measure. In green route optimisation, that number is the emissions. So the model lowers the fuel you burn directly.

Modelling emissions by vehicle, load and speed

Emissions per kilometre vary hugely by vehicle type. A diesel truck, an electric van and an articulated lorry each emit a very different amount per kilometre. For the same vehicle, emissions also change with the load. A full truck burns more fuel than a nearly empty one, but it moves far more goods. So each tonne of goods causes far less CO₂. The greenest plan therefore moves as many goods as possible on each trip.

Every vehicle also has a range of speeds at which it uses the least fuel. A model can plan the speed on each stretch as well as the path. That saves emissions that a model looking only at distance never sees. Once the model knows all of this, it accepts a few extra kilometres if total emissions go down.

Electric vehicle routing optimisation

Electric vehicles (EVs) make the problem harder. In an EV, the state of charge decides how far it can still drive. The state of charge is the share of battery left. That limit is fixed. How fast it drops depends on load, hills and weather. So a route that works for a diesel can be impossible for an EV.

EV route planning with charging

Charging stops are the new problem diesel never had. The model decides which stops to visit and in what order, and also when and where to charge, and for how long. Charging takes time in the plan, just like a delivery does.

The charging location is itself a choice: depot charger, public rapid charger or a charger at the destination. Insert a charging stop naively, and you add a useless detour. Put it where the battery already runs low and the window allows the wait, and you get a green route that also works.

Trading off cost and carbon

Multi-objective optimisation handles cost and carbon as two separate goals. The model then shows you how much each saving in CO₂ costs. You choose the plan that fits you. That might be a small saving at no extra cost, a larger one at a known extra cost, or a fixed upper limit for CO₂ that the plan never exceeds.

Carbon minimisation logistics: which scope your routes land in

Many companies ask about green routing because they report their emissions. The common standard for this is the Greenhouse Gas Protocol (GHG Protocol). It sorts emissions into three groups, called scopes. Which scope your routes fall into depends on who owns the vehicle. Fuel burned in vans you own or control is Scope 1, your direct emissions. Electricity you buy to charge them is Scope 2. Transport by carriers you hire and pay is Scope 3, under upstream transportation and distribution (Category 4). If your customer pays for the transport of your goods, it counts as downstream (Category 9).

The scope decides where a saving from better routes shows up in your report. Better routes for your own diesel fleet cut Scope 1 directly, and less energy per drop for electric vans shows in Scope 2. For hired transport the saving shows up in Scope 3, and you need your carriers’ figures to prove it. Our model reports the emissions behind each plan with the vehicle and kilometres they came from, so the number in your report can be checked.

Common questions.

Something else? Ask us directly.

It depends on who owns the vehicle. The GHG Protocol is the common standard for counting greenhouse gases. It sorts emissions into three groups called scopes. Fuel burned in vehicles you own or control is Scope 1. Electricity you buy to charge them is Scope 2. Transport by a carrier you hire and pay is Scope 3, Category 4. If your customer pays for the transport of your goods, it’s Category 9. Many companies have all three, so routing savings show up in more than one place.

Because charging isn’t linear. A battery takes energy fast when it’s low and slows down as it fills, and a depot charger and a rapid charger differ a lot. With a fixed time, the van either stands at the charger longer than needed, or its battery runs out before the last stops. So a good model knows how fast a battery charges at each charge level and at each type of charger.

Not always. Fuller vans and fewer kilometres in slow city traffic often cut cost and emissions together. Past a certain point the two goals work against each other: when emissions go down, cost goes up. Further savings then need slower speeds, detours or more vehicles. The model shows you where that point lies on your own data. You decide where to stop, instead of guessing.

Sometimes it can, and if that’s the case, we’ll tell you. Standard software is built for an average operation, though. Yours runs on its own rules: your contracts, your exceptions, the things you know by heart. A custom model writes those rules in, and that’s where the better plan comes from.

You don’t need either to start. We build the model from the data you’ve already got, even if it lives in three spreadsheets and one person’s head. You get a system you run yourself. We train your team until they no longer need us.

You see a first result with the prototype, before you commit to anything bigger. We start with a free 30-minute call about your operation and the model that would fit it. Then we build a working prototype and run it on your numbers.

Tell us what you’re planning.

In a free 30-minute call with a specialist, you find out whether optimisation can help.

  • Free, no commitment
  • You talk to a specialist directly
  • A clear go or no-go